ISO Certification
 
 
 
Click to enlarge Each coil run across the tension level line is visually inspected. The team leader will hand "mic" gauge & measure the width of the coil at both the Head and Tail of the coil. He will also road map any surface defects in the coil. Defects are described as light, medium and heavy in severity. Locations are described as from the East or West Edges and at a distance measured from the Head End of the coil by footage meters on the line. Electronic calipers can be used for more precise measurements as required. Inspection Reports are available on every coil run. Formal HFI's (Hold For Inspection notices) are sent from the Plant Quality Office on coils deemed non prime & require disposition in order to ship.
 
 

 

 
Contacts | Customer Assessment | Privacy Policy | Site Map

Copyright, All rights reserved.